Kein Wlan
- Ersteller Hellmi666
- Erstellt am
Moin,
ein guter Start ist sicher einmal hier die komplette DMSG zu posten und ein paar Infos über die Hardware zu verkünden. Am allerwichtigsten:
Was für ein Wifi-Modul? Wie ist es angebunden?
Außerdem verschiebe ich das mal - GhostBSD ist kein OpenBSD
LG
Zeddi
ein guter Start ist sicher einmal hier die komplette DMSG zu posten und ein paar Infos über die Hardware zu verkünden. Am allerwichtigsten:
Was für ein Wifi-Modul? Wie ist es angebunden?
Außerdem verschiebe ich das mal - GhostBSD ist kein OpenBSD
LG
Zeddi
Warum hattest du es vor der Installation im Live-Modus nicht gecheckt? Auch hier kannst du - was ich immer machen würde - ein dmesg oder pciconf -lv im Terminal laufen lassen.
Sorry, hab mich vertan.
Das gestaltet sich etwas schwierig, da kein Internet mit Ghost-BSD. Den Post schrieb ich mit dem Handy. Jetzt bin ich mit dem Laptop unterwegs, wo auch Ghost-BSD drauf ist.
Ich könnte von meinem Manjaro (wo die Internetanbindung sofort funktionierte) ein dmesg erstellen, wegen der verbauten Hardware.
Code:
[ 0.000000] Linux version 6.8.12-3-MANJARO (builduser@fv-az982-753) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon Jun 10 09:44:22 UTC 2024
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8-x86_64 root=UUID=bb9328ed-04ab-4ae5-84ff-a6f9df9379e0 ro apparmor=1 security=apparmor udev.log_priority=3
[ 0.000000] BIOS-pro]vided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000e6e0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e6e0f000-0x00000000e787efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e787f000-0x00000000e7b7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000e7b7f000-0x00000000e7bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e7bff000-0x00000000e7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e7c00000-0x00000000e7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0100000-0x00000000f01fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000111ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000112000000-0x0000000116ffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xdb46d018-0xdb47cc57] usable ==> usable
[ 0.000000] e820: update [mem 0xdb46d018-0xdb47cc57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000db46d017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000db46d018-0x00000000db47cc57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000db47cc58-0x00000000e6e0efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e6e0f000-0x00000000e787efff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e787f000-0x00000000e7b7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000e7b7f000-0x00000000e7bfefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000e7bff000-0x00000000e7bfffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e7c00000-0x00000000e7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0100000-0x00000000f01fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000111ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000112000000-0x0000000116ffffff] reserved
[ 0.000000] efi: EFI v2.5 by INSYDE Corp.
[ 0.000000] efi: ESRT=0xe71e1098 ACPI 2.0=0xe7bfe014 SMBIOS=0xe71df000 SMBIOS 3.0=0xe71dd000 INITRD=0xde40ed98 RNG=0xe7bcc018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem45: MMIO range=[0xf0100000-0xf01fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0100000-0xf01fffff] reserved
[ 0.000000] efi: Remove mem46: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Not removing mem47: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem48: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem49: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem50: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem51: MMIO range=[0xff800000-0xffffffff] (8MB) from e820 map
[ 0.000000] e820: remove [mem 0xff800000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: HP HP Laptop 15-bw0xx/8330, BIOS F.23 04/03/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1497.226 MHz processor
[ 0.012642] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.012648] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.012662] last_pfn = 0x112000 max_arch_pfn = 0x400000000
[ 0.012676] MTRR map: 6 entries (3 fixed + 3 variable; max 20), built from 9 variable MTRRs
[ 0.012680] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.012985] last_pfn = 0xe7c00 max_arch_pfn = 0x400000000
[ 0.021855] esrt: Reserving ESRT space from 0x00000000e71e1098 to 0x00000000e71e10d0.
[ 0.021870] Using GB pages for direct mapping
[ 0.022384] Secure boot disabled
[ 0.022385] RAMDISK: [mem 0xd62e6000-0xd7fcdfff]
[ 0.022444] ACPI: Early table checksum verification disabled
[ 0.022450] ACPI: RSDP 0x00000000E7BFE014 000024 (v02 HPQOEM)
[ 0.022458] ACPI: XSDT 0x00000000E7BD2188 0000DC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.022469] ACPI: FACP 0x00000000E7BF9000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.022479] ACPI: DSDT 0x00000000E7BE9000 0099DA (v01 HPQOEM SLIC-MPC 00040000 ACPI 00040000)
[ 0.022487] ACPI: FACS 0x00000000E7B44000 000040
[ 0.022492] ACPI: UEFI 0x00000000E7BFD000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022499] ACPI: ASF! 0x00000000E7BFB000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022505] ACPI: BOOT 0x00000000E7BFA000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022511] ACPI: HPET 0x00000000E7BF8000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022517] ACPI: APIC 0x00000000E7BF7000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.022523] ACPI: MCFG 0x00000000E7BF6000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022529] ACPI: SPCR 0x00000000E7BF5000 000050 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022535] ACPI: WDAT 0x00000000E7BF4000 00017C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022540] ACPI: WDRT 0x00000000E7BF3000 000047 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.022546] ACPI: UEFI 0x00000000E7BE8000 000042 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.022551] ACPI: SSDT 0x00000000E7BE1000 00692D (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.022557] ACPI: SSDT 0x00000000E7BE0000 00043C (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
[ 0.022563] ACPI: SSDT 0x00000000E7BDB000 004B5B (v02 HPQOEM INSYDE 00000002 ACPI 00040000)
[ 0.022569] ACPI: IVRS 0x00000000E7BDA000 0000D0 (v02 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022574] ACPI: CRAT 0x00000000E7BD9000 0002E8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022580] ACPI: SSDT 0x00000000E7BD8000 000692 (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
[ 0.022585] ACPI: SSDT 0x00000000E7BD7000 000174 (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
[ 0.022591] ACPI: SSDT 0x00000000E7BD5000 001CE0 (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
[ 0.022597] ACPI: SSDT 0x00000000E7BD3000 00165E (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
[ 0.022602] ACPI: FPDT 0x00000000E7BD1000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.022608] ACPI: SSDT 0x00000000E7BCE000 0021DF (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
[ 0.022613] ACPI: BGRT 0x00000000E7BCD000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.022618] ACPI: Reserving FACP table memory at [mem 0xe7bf9000-0xe7bf910b]
[ 0.022621] ACPI: Reserving DSDT table memory at [mem 0xe7be9000-0xe7bf29d9]
[ 0.022624] ACPI: Reserving FACS table memory at [mem 0xe7b44000-0xe7b4403f]
[ 0.022626] ACPI: Reserving UEFI table memory at [mem 0xe7bfd000-0xe7bfd235]
[ 0.022628] ACPI: Reserving ASF! table memory at [mem 0xe7bfb000-0xe7bfb0a4]
[ 0.022630] ACPI: Reserving BOOT table memory at [mem 0xe7bfa000-0xe7bfa027]
[ 0.022632] ACPI: Reserving HPET table memory at [mem 0xe7bf8000-0xe7bf8037]
[ 0.022634] ACPI: Reserving APIC table memory at [mem 0xe7bf7000-0xe7bf708f]
[ 0.022636] ACPI: Reserving MCFG table memory at [mem 0xe7bf6000-0xe7bf603b]
[ 0.022638] ACPI: Reserving SPCR table memory at [mem 0xe7bf5000-0xe7bf504f]
[ 0.022640] ACPI: Reserving WDAT table memory at [mem 0xe7bf4000-0xe7bf417b]
[ 0.022641] ACPI: Reserving WDRT table memory at [mem 0xe7bf3000-0xe7bf3046]
[ 0.022643] ACPI: Reserving UEFI table memory at [mem 0xe7be8000-0xe7be8041]
[ 0.022645] ACPI: Reserving SSDT table memory at [mem 0xe7be1000-0xe7be792c]
[ 0.022647] ACPI: Reserving SSDT table memory at [mem 0xe7be0000-0xe7be043b]
[ 0.022649] ACPI: Reserving SSDT table memory at [mem 0xe7bdb000-0xe7bdfb5a]
[ 0.022651] ACPI: Reserving IVRS table memory at [mem 0xe7bda000-0xe7bda0cf]
[ 0.022653] ACPI: Reserving CRAT table memory at [mem 0xe7bd9000-0xe7bd92e7]
[ 0.022655] ACPI: Reserving SSDT table memory at [mem 0xe7bd8000-0xe7bd8691]
[ 0.022657] ACPI: Reserving SSDT table memory at [mem 0xe7bd7000-0xe7bd7173]
[ 0.022659] ACPI: Reserving SSDT table memory at [mem 0xe7bd5000-0xe7bd6cdf]
[ 0.022661] ACPI: Reserving SSDT table memory at [mem 0xe7bd3000-0xe7bd465d]
[ 0.022663] ACPI: Reserving FPDT table memory at [mem 0xe7bd1000-0xe7bd1043]
[ 0.022665] ACPI: Reserving SSDT table memory at [mem 0xe7bce000-0xe7bd01de]
[ 0.022667] ACPI: Reserving BGRT table memory at [mem 0xe7bcd000-0xe7bcd037]
[ 0.022739] No NUMA configuration found
[ 0.022741] Faking a node at [mem 0x0000000000000000-0x0000000111ffffff]
[ 0.022747] NODE_DATA(0) allocated [mem 0x111ffb000-0x111ffffff]
[ 0.022782] Zone ranges:
[ 0.022783] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.022787] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.022790] Normal [mem 0x0000000100000000-0x0000000111ffffff]
[ 0.022793] Device empty
[ 0.022795] Movable zone start for each node
[ 0.022797] Early memory node ranges
[ 0.022798] node 0: [mem 0x0000000000001000-0x0000000000087fff]
[ 0.022801] node 0: [mem 0x0000000000100000-0x00000000e6e0efff]
[ 0.022804] node 0: [mem 0x00000000e7bff000-0x00000000e7bfffff]
[ 0.022806] node 0: [mem 0x0000000100000000-0x0000000111ffffff]
[ 0.022808] Initmem setup node 0 [mem 0x0000000000001000-0x0000000111ffffff]
[ 0.022817] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.022854] On node 0, zone DMA: 120 pages in unavailable ranges
[ 0.038070] On node 0, zone DMA32: 3568 pages in unavailable ranges
[ 0.039283] On node 0, zone Normal: 1024 pages in unavailable ranges
[ 0.039696] On node 0, zone Normal: 24576 pages in unavailable ranges
[ 0.039847] ACPI: PM-Timer IO Port: 0x408
[ 0.039859] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.039862] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.039865] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.039866] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.039877] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.039883] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.039887] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.039891] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.039899] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.039901] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.039914] e820: update [mem 0xe4bfe000-0xe4c07fff] usable ==> reserved
[ 0.039937] ACPI: SPCR: SPCR table version 1
[ 0.039940] ACPI: SPCR: console: uart,io,0x3f8,115200
[ 0.039943] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.039968] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.039972] PM: hibernation: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.039974] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.039977] PM: hibernation: Registered nosave memory: [mem 0xdb46d000-0xdb46dfff]
[ 0.039980] PM: hibernation: Registered nosave memory: [mem 0xdb47c000-0xdb47cfff]
[ 0.039984] PM: hibernation: Registered nosave memory: [mem 0xe4bfe000-0xe4c07fff]
[ 0.039987] PM: hibernation: Registered nosave memory: [mem 0xe6e0f000-0xe787efff]
[ 0.039989] PM: hibernation: Registered nosave memory: [mem 0xe787f000-0xe7b7efff]
[ 0.039990] PM: hibernation: Registered nosave memory: [mem 0xe7b7f000-0xe7bfefff]
[ 0.039993] PM: hibernation: Registered nosave memory: [mem 0xe7c00000-0xe7ffffff]
[ 0.039995] PM: hibernation: Registered nosave memory: [mem 0xe8000000-0xfebfffff]
[ 0.039997] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.039998] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.040000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.040002] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.040003] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.040005] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.040006] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.040008] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.040011] [mem 0xe8000000-0xfebfffff] available for PCI devices
[ 0.040014] Booting paravirtualized kernel on bare hardware
[ 0.040018] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.048965] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.049684] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
[ 0.049696] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
[ 0.049702] pcpu-alloc: [0] 0 1 2 3
[ 0.049737] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8-x86_64 root=UUID=bb9328ed-04ab-4ae5-84ff-a6f9df9379e0 ro apparmor=1 security=apparmor udev.log_priority=3
[ 0.049890] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.8-x86_64", will be passed to user space.
[ 0.050927] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.051446] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.051516] Fallback order for Node 0: 0
[ 0.051523] Built 1 zonelists, mobility grouping on. Total pages: 1002199
[ 0.051526] Policy zone: Normal
[ 0.052137] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.052149] AMD-Vi: Disable IOMMU on Stoney Ridge
[ 0.052154] software IO TLB: area num 4.
[ 0.105720] Memory: 3789296K/4077148K available (18432K kernel code, 2138K rwdata, 12976K rodata, 3464K init, 3648K bss, 287592K reserved, 0K cma-reserved)
[ 0.106144] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.106199] ftrace: allocating 49311 entries in 193 pages
[ 0.123778] ftrace: allocated 193 pages with 3 groups
[ 0.123953] Dynamic Preempt: full
[ 0.124021] rcu: Preemptible hierarchical RCU implementation.
[ 0.124023] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.124026] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.124028] Trampoline variant of Tasks RCU enabled.
[ 0.124030] Rude variant of Tasks RCU enabled.
[ 0.124031] Tracing variant of Tasks RCU enabled.
[ 0.124032] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.124034] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.129835] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[ 0.130090] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.130268] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.130339] Console: colour dummy device 80x25
[ 0.130345] printk: legacy console [tty0] enabled
[ 0.130432] ACPI: Core revision 20230628
[ 0.130687] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.130713] APIC: Switch to symmetric I/O mode setup
[ 0.131143] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.147379] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1594e639bf0, max_idle_ns: 440795252298 ns
[ 0.147389] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.22 BogoMIPS (lpj=4990753)
[ 0.147409] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[ 0.147413] SVM disabled (by BIOS) in MSR_VM_CR
[ 0.147431] LVT offset 1 assigned for vector 0xf9
[ 0.147447] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.147450] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.147456] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.147460] Spectre V2 : Mitigation: Retpolines
[ 0.147462] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.147463] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.147465] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.147467] RETBleed: Mitigation: untrained return thunk
[ 0.147470] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.147473] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.147482] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.147485] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.147487] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.147490] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.147493] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.189259] Freeing SMP alternatives memory: 40K
[ 0.189271] pid_max: default: 32768 minimum: 301
[ 0.194125] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,apparmor,integrity
[ 0.194148] landlock: Up and running.
[ 0.194151] Yama: becoming mindful.
[ 0.194161] LSM support for eBPF active
[ 0.194202] AppArmor: AppArmor initialized
[ 0.194253] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.194268] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.197509] smpboot: CPU 0 Converting physical 2 to logical die 0
[ 0.306929] smpboot: CPU0: AMD E2-9000e RADEON R2, 4 COMPUTE CORES 2C+2G (family: 0x15, model: 0x70, stepping: 0x0)
[ 0.307278] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.307307] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.307345] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.307379] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.307385] ... version: 0
[ 0.307385] ... bit width: 48
[ 0.307385] ... generic registers: 6
[ 0.307385] ... value mask: 0000ffffffffffff
[ 0.307385] ... max period: 00007fffffffffff
[ 0.307385] ... fixed-purpose events: 0
[ 0.307385] ... event mask: 000000000000003f
[ 0.307385] signal: max sigframe size: 1776
[ 0.307385] rcu: Hierarchical SRCU implementation.
[ 0.307385] rcu: Max phase no-delay instances is 1000.
[ 0.310279] MCE: In-kernel MCE decoding enabled.
[ 0.310407] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.310518] smp: Bringing up secondary CPUs ...
[ 0.310760] smpboot: x86: Booting SMP configuration:
[ 0.310763] .... node #0, CPUs: #1
[ 0.312723] smp: Brought up 1 node, 2 CPUs
[ 0.312723] smpboot: Max logical packages: 2
[ 0.312723] smpboot: Total of 2 processors activated (5991.44 BogoMIPS)
[ 0.314073] devtmpfs: initialized
[ 0.314119] x86/mm: Memory block size: 128MB
[ 0.315167] ACPI: PM: Registering ACPI NVS region [mem 0xe787f000-0xe7b7efff] (3145728 bytes)
[ 0.315314] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.315336] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.315448] pinctrl core: initialized pinctrl subsystem
[ 0.315646] PM: RTC time: 07:07:34, date: 2024-06-18
[ 0.317185] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.317719] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.317859] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.318007] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.318037] audit: initializing netlink subsys (disabled)
[ 0.318166] audit: type=2000 audit(1718694454.186:1): state=initialized audit_enabled=0 res=1
[ 0.318401] thermal_sys: Registered thermal governor 'fair_share'
[ 0.318404] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.318407] thermal_sys: Registered thermal governor 'step_wise'
[ 0.318408] thermal_sys: Registered thermal governor 'user_space'
[ 0.318410] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.318436] cpuidle: using governor ladder
[ 0.318446] cpuidle: using governor menu
[ 0.318543] Simple Boot Flag at 0x44 set to 0x1
[ 0.318543] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.318543] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.318543] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.318543] PCI: not using ECAM ([mem 0xf8000000-0xfbffffff] not reserved)
[ 0.318543] PCI: Using configuration type 1 for base access
[ 0.318543] PCI: Using configuration type 1 for extended access
[ 0.318543] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.326426] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.326433] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.326437] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.326439] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.332509] ACPI: Added _OSI(Module Device)
[ 0.332514] ACPI: Added _OSI(Processor Device)
[ 0.332517] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.332519] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.370045] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.376882] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.381806] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.382294] ACPI: EC: EC started
[ 0.382296] ACPI: EC: interrupt blocked
[ 0.382664] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.382669] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[ 0.382672] ACPI: Interpreter enabled
[ 0.382712] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.382715] ACPI: Using IOAPIC for interrupt routing
[ 0.384450] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.386751] PCI: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] not reserved in ACPI motherboard resources
[ 0.386755] PCI: ECAM [mem 0xf8000000-0xfbffffff] is EfiMemoryMappedIO; assuming valid
[ 0.386758] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved to work around lack of ACPI motherboard _CRS
[ 0.386770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.386773] PCI: Using E820 reservations for host bridge windows
[ 0.387181] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.390795] ACPI: \_SB_.P0U2: New power resource
[ 0.390860] ACPI: \_SB_.P3U2: New power resource
[ 0.391446] ACPI: \_SB_.P0U3: New power resource
[ 0.391507] ACPI: \_SB_.P3U3: New power resource
[ 0.454462] ACPI: \_SB_.P0ST: New power resource
[ 0.454530] ACPI: \_SB_.P3ST: New power resource
[ 0.456536] ACPI: \_SB_.P0SD: New power resource
[ 0.456598] ACPI: \_SB_.P3SD: New power resource
[ 0.458116] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20230628/psargs-330)
[ 0.458133] fbcon: Taking over console
[ 0.458164] ACPI Error: Aborting method \_SB.WLBU._STA due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[ 0.461428] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.461442] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.461611] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.461908] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.461912] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.461938] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.462132] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cfbff])
[ 0.462538] PCI host bridge to bus 0000:00
[ 0.462542] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.462546] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.462549] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.462553] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cbfff window]
[ 0.462557] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[ 0.462560] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xf7ffffff window]
[ 0.462564] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[ 0.462567] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.462765] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000 conventional PCI endpoint
[ 0.462879] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600 conventional PCI endpoint
[ 0.462998] pci 0000:00:01.0: [1002:98e4] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.463015] pci 0000:00:01.0: BAR 0 [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.463027] pci 0000:00:01.0: BAR 2 [mem 0xf0800000-0xf0ffffff 64bit pref]
[ 0.463034] pci 0000:00:01.0: BAR 4 [io 0x4000-0x40ff]
[ 0.463042] pci 0000:00:01.0: BAR 5 [mem 0xf0400000-0xf043ffff]
[ 0.463050] pci 0000:00:01.0: ROM [mem 0xfffe0000-0xffffffff pref]
[ 0.463057] pci 0000:00:01.0: enabling Extended Tags
[ 0.463072] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.463078] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.463114] pci 0000:00:01.0: supports D1 D2
[ 0.463117] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.463279] pci 0000:00:01.1: [1002:15b3] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[ 0.463295] pci 0000:00:01.1: BAR 0 [mem 0xf0460000-0xf0463fff 64bit]
[ 0.463324] pci 0000:00:01.1: enabling Extended Tags
[ 0.463361] pci 0000:00:01.1: supports D1 D2
[ 0.463443] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000 conventional PCI endpoint
[ 0.463533] pci 0000:00:02.1: [1022:157c] type 01 class 0x060400 PCIe Root Port
[ 0.463559] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.463585] pci 0000:00:02.1: enabling Extended Tags
[ 0.463637] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.463786] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400 PCIe Root Port
[ 0.463812] pci 0000:00:02.2: PCI bridge to [bus 02]
[ 0.463819] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]
[ 0.463824] pci 0000:00:02.2: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.463843] pci 0000:00:02.2: enabling Extended Tags
[ 0.463895] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.464039] pci 0000:00:02.4: [1022:157c] type 01 class 0x060400 PCIe Root Port
[ 0.464074] pci 0000:00:02.4: PCI bridge to [bus 03-05]
[ 0.464082] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
[ 0.464087] pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.464097] pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.464109] pci 0000:00:02.4: enabling Extended Tags
[ 0.464159] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.464327] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000 conventional PCI endpoint
[ 0.464427] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000 conventional PCI endpoint
[ 0.464441] pci 0000:00:08.0: BAR 0 [mem 0xf0440000-0xf045ffff 64bit pref]
[ 0.464448] pci 0000:00:08.0: BAR 2 [mem 0xf0200000-0xf02fffff]
[ 0.464455] pci 0000:00:08.0: BAR 3 [mem 0xf046f000-0xf046ffff]
[ 0.464465] pci 0000:00:08.0: BAR 5 [mem 0xf046a000-0xf046bfff]
[ 0.464599] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000 conventional PCI endpoint
[ 0.464685] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300 conventional PCI endpoint
[ 0.464697] pci 0000:00:09.2: BAR 0 [mem 0xf0464000-0xf0467fff]
[ 0.464743] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.464877] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint
[ 0.464903] pci 0000:00:10.0: BAR 0 [mem 0xf0468000-0xf0469fff 64bit]
[ 0.465019] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.465183] pci 0000:00:11.0: [1022:7904] type 00 class 0x010601 conventional PCI endpoint
[ 0.465201] pci 0000:00:11.0: BAR 0 [io 0x4118-0x411f]
[ 0.465212] pci 0000:00:11.0: BAR 1 [io 0x4124-0x4127]
[ 0.465222] pci 0000:00:11.0: BAR 2 [io 0x4110-0x4117]
[ 0.465232] pci 0000:00:11.0: BAR 3 [io 0x4120-0x4123]
[ 0.465242] pci 0000:00:11.0: BAR 4 [io 0x4100-0x410f]
[ 0.465252] pci 0000:00:11.0: BAR 5 [mem 0xf046c000-0xf046c3ff]
[ 0.465295] pci 0000:00:11.0: PME# supported from D3hot
[ 0.466812] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.467625] pci 0000:00:12.0: BAR 0 [mem 0xf046d000-0xf046d0ff]
[ 0.470475] pci 0000:00:12.0: supports D1 D2
[ 0.470479] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472359] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.472359] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.472359] pci 0000:00:18.0: [1022:15b0] type 00 class 0x060000 conventional PCI endpoint
[ 0.472359] pci 0000:00:18.1: [1022:15b1] type 00 class 0x060000 conventional PCI endpoint
[ 0.472359] pci 0000:00:18.2: [1022:15b2] type 00 class 0x060000 conventional PCI endpoint
[ 0.472359] pci 0000:00:18.3: [1022:15b3] type 00 class 0x060000 conventional PCI endpoint
[ 0.472359] pci 0000:00:18.4: [1022:15b4] type 00 class 0x060000 conventional PCI endpoint
[ 0.472359] pci 0000:00:18.5: [1022:15b5] type 00 class 0x060000 conventional PCI endpoint
[ 0.472359] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.472359] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.472359] pci 0000:02:00.0: BAR 0 [io 0x3000-0x30ff]
[ 0.472359] pci 0000:02:00.0: BAR 2 [mem 0xf0304000-0xf0304fff 64bit]
[ 0.472359] pci 0000:02:00.0: BAR 4 [mem 0xf0300000-0xf0303fff 64bit]
[ 0.472359] pci 0000:02:00.0: supports D1 D2
[ 0.472359] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472359] pci 0000:00:02.2: PCI bridge to [bus 02]
[ 0.472425] pci 0000:03:00.0: [10ec:d723] type 00 class 0x028000 PCIe Endpoint
[ 0.472451] pci 0000:03:00.0: BAR 0 [io 0x2000-0x20ff]
[ 0.472483] pci 0000:03:00.0: BAR 2 [mem 0xf1000000-0xf100ffff 64bit]
[ 0.472624] pci 0000:03:00.0: supports D1 D2
[ 0.472627] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472845] pci 0000:00:02.4: PCI bridge to [bus 03-05]
[ 0.536021] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.536029] ACPI: PCI: Interrupt link LNKA disabled
[ 0.536160] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.536163] ACPI: PCI: Interrupt link LNKB disabled
[ 0.536268] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.536271] ACPI: PCI: Interrupt link LNKC disabled
[ 0.536399] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.536401] ACPI: PCI: Interrupt link LNKD disabled
[ 0.536520] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.536523] ACPI: PCI: Interrupt link LNKE disabled
[ 0.536618] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.536621] ACPI: PCI: Interrupt link LNKF disabled
[ 0.536715] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.536718] ACPI: PCI: Interrupt link LNKG disabled
[ 0.536812] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.536814] ACPI: PCI: Interrupt link LNKH disabled
[ 0.536920] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20230628/psargs-330)
[ 0.536941] ACPI Error: Aborting method \_SB.WLBU._STA due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[ 0.537916] ACPI: EC: interrupt unblocked
[ 0.537920] ACPI: EC: event unblocked
[ 0.537923] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.537926] ACPI: EC: GPE=0x3
[ 0.537929] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[ 0.537933] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[ 0.538077] iommu: Default domain type: Translated
[ 0.538077] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.540750] SCSI subsystem initialized
[ 0.540770] libata version 3.00 loaded.
[ 0.540770] ACPI: bus type USB registered
[ 0.540771] usbcore: registered new interface driver usbfs
[ 0.540783] usbcore: registered new interface driver hub
[ 0.540794] usbcore: registered new device driver usb
[ 0.540855] EDAC MC: Ver: 3.0.0
[ 0.540955] efivars: Registered efivars operations
[ 0.541086] NetLabel: Initializing
[ 0.541090] NetLabel: domain hash size = 128
[ 0.541092] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.541119] NetLabel: unlabeled traffic allowed by default
[ 0.541126] mctp: management component transport protocol core
[ 0.541128] NET: Registered PF_MCTP protocol family
[ 0.541135] PCI: Using ACPI for IRQ routing
[ 0.542182] PCI: pci_cache_line_size set to 64 bytes
[ 0.542182] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.542182] e820: reserve RAM buffer [mem 0xdb46d018-0xdbffffff]
[ 0.542182] e820: reserve RAM buffer [mem 0xe4bfe000-0xe7ffffff]
[ 0.542182] e820: reserve RAM buffer [mem 0xe6e0f000-0xe7ffffff]
[ 0.542182] e820: reserve RAM buffer [mem 0xe7c00000-0xe7ffffff]
[ 0.542182] e820: reserve RAM buffer [mem 0x112000000-0x113ffffff]
[ 0.544087] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.544087] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.544087] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.544089] vgaarb: loaded
[ 0.544135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.544144] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.546206] clocksource: Switched to clocksource tsc-early
[ 0.546206] VFS: Disk quotas dquot_6.6.0
[ 0.546206] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.546206] AppArmor: AppArmor Filesystem Enabled
[ 0.546206] pnp: PnP ACPI init
[ 0.546255] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.546263] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.546268] system 00:00: [mem 0xf0100000-0xf01fffff] has been reserved
[ 0.546665] system 00:04: [io 0x0400-0x04cf] has been reserved
[ 0.546670] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.546674] system 00:04: [io 0x04d6] has been reserved
[ 0.546677] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.546680] system 00:04: [io 0x0c14] has been reserved
[ 0.546683] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.546686] system 00:04: [io 0x0c6c] has been reserved
[ 0.546689] system 00:04: [io 0x0c6f] has been reserved
[ 0.546692] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.546818] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.546823] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[ 0.609377] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20230628/psargs-330)
[ 0.609405] ACPI Error: Aborting method \_SB.WLBU._STA due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[ 0.609757] pnp: PnP ACPI: found 6 devices
[ 0.616992] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.617141] NET: Registered PF_INET protocol family
[ 0.617342] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.646559] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.646608] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.646649] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.646924] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.647086] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.647252] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.647368] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.647410] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.647533] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.647547] NET: Registered PF_XDP protocol family
[ 0.647560] pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.647568] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.647575] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.647598] pci 0000:00:02.1: bridge window [mem 0xf0500000-0xf06fffff]: assigned
[ 0.647607] pci 0000:00:02.1: bridge window [mem 0xf1100000-0xf12fffff 64bit pref]: assigned
[ 0.647613] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]: assigned
[ 0.647620] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.647625] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
[ 0.647631] pci 0000:00:02.1: bridge window [mem 0xf0500000-0xf06fffff]
[ 0.647636] pci 0000:00:02.1: bridge window [mem 0xf1100000-0xf12fffff 64bit pref]
[ 0.647643] pci 0000:00:02.2: PCI bridge to [bus 02]
[ 0.647646] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]
[ 0.647651] pci 0000:00:02.2: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.647660] pci 0000:00:02.4: PCI bridge to [bus 03-05]
[ 0.647663] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
[ 0.647668] pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.647673] pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.647683] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.647687] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.647690] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.647693] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cbfff window]
[ 0.647696] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
[ 0.647698] pci_bus 0000:00: resource 9 [mem 0xe8000000-0xf7ffffff window]
[ 0.647701] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window]
[ 0.647705] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.647708] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf06fffff]
[ 0.647710] pci_bus 0000:01: resource 2 [mem 0xf1100000-0xf12fffff 64bit pref]
[ 0.647714] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.647716] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.647719] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.647722] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff]
[ 0.647725] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.647865] pci 0000:00:01.0: disabling ATS
[ 0.647919] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.655954] pci 0000:00:10.0: PME# does not work under D0, disabling it
[ 0.674379] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7b0 took 17976 usecs
[ 0.674434] PCI: CLS 64 bytes, default 64
[ 0.674450] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.674452] software IO TLB: mapped [mem 0x00000000dfa24000-0x00000000e3a24000] (64MB)
[ 0.674529] LVT offset 0 assigned for vector 0x400
[ 0.674567] Trying to unpack rootfs image as initramfs...
[ 0.674578] perf: AMD IBS detected (0x000007ff)
[ 0.675589] Initialise system trusted keyrings
[ 0.675620] Key type blacklist registered
[ 0.675804] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.675837] zbud: loaded
[ 0.676180] fuse: init (API version 7.39)
[ 0.676463] integrity: Platform Keyring initialized
[ 0.676472] integrity: Machine keyring initialized
[ 0.699060] Key type asymmetric registered
[ 0.699071] Asymmetric key parser 'x509' registered
[ 0.699128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.699287] io scheduler mq-deadline registered
[ 0.699291] io scheduler kyber registered
[ 0.699320] io scheduler bfq registered
[ 0.699887] pcieport 0000:00:02.1: PME: Signaling with IRQ 25
[ 0.699950] pcieport 0000:00:02.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.700462] pcieport 0000:00:02.2: PME: Signaling with IRQ 26
[ 0.700702] pcieport 0000:00:02.4: PME: Signaling with IRQ 27
[ 0.700854] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.701737] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 0.701854] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.701905] ACPI: button: Power Button [PWRB]
[ 0.702020] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.702068] ACPI: button: Lid Switch [LID]
[ 0.702137] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.711721] ACPI: button: Power Button [PWRF]
[ 0.711848] ACPI: \_PR_.C000: Found 2 idle states
[ 0.712044] ACPI: \_PR_.C001: Found 2 idle states
[ 0.712562] ACPI: thermal: [Firmware Bug]: Invalid critical threshold (-274000)
[ 0.712795] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.712798] ACPI: thermal: Thermal Zone [TSZ0] (49 C)
[ 0.713059] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.713064] ACPI: thermal: Thermal Zone [TSZ2] (20 C)
[ 0.713862] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.723263] Non-volatile memory driver v1.3
[ 0.723274] Linux agpgart interface v0.103
[ 0.723395] ACPI: bus type drm_connector registered
[ 0.725440] ahci 0000:00:11.0: version 3.0
[ 0.725770] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.725779] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 0.728209] scsi host0: ahci
[ 0.728499] scsi host1: ahci
[ 0.728598] ata1: SATA max UDMA/133 abar m1024@0xf046c000 port 0xf046c100 irq 19 lpm-pol 0
[ 0.728605] ata2: SATA max UDMA/133 abar m1024@0xf046c000 port 0xf046c180 irq 19 lpm-pol 0
[ 0.728835] usbcore: registered new interface driver usbserial_generic
[ 0.728848] usbserial: USB Serial support registered for generic
[ 0.729097] rtc_cmos 00:01: RTC can wake from S4
[ 0.729429] rtc_cmos 00:01: registered as rtc0
[ 0.729461] rtc_cmos 00:01: setting system clock to 2024-06-18T07:07:34 UTC (1718694454)
[ 0.729510] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.729613] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[ 0.729614] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 0.729626] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.729642] ehci-pci 0000:00:12.0: debug port 2
[ 0.729667] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.729713] ehci-pci 0000:00:12.0: irq 18, io mem 0xf046d000
[ 0.730436] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.739768] Console: switching to colour frame buffer device 170x48
[ 0.744070] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 0.744291] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 0.744298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.744303] usb usb1: Product: EHCI Host Controller
[ 0.744307] usb usb1: Manufacturer: Linux 6.8.12-3-MANJARO ehci_hcd
[ 0.744310] usb usb1: SerialNumber: 0000:00:12.0
[ 0.744851] hub 1-0:1.0: USB hub found
[ 0.744891] hub 1-0:1.0: 2 ports detected
[ 0.746721] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.750752] hid: raw HID events driver (C) Jiri Kosina
[ 0.750967] drop_monitor: Initializing network drop monitor service
[ 0.751148] NET: Registered PF_INET6 protocol family
[ 0.818577] ACPI: battery: Slot [BAT1] (battery present)
[ 0.994394] Freeing initrd memory: 29600K
[ 0.997370] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.006273] Segment Routing with IPv6
[ 1.006280] RPL Segment Routing with IPv6
[ 1.006305] In-situ OAM (IOAM) with IPv6
[ 1.006368] NET: Registered PF_PACKET protocol family
[ 1.006440] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 1.006715] microcode: Current revision: 0x06006705
[ 1.006806] IPI shorthand broadcast: enabled
[ 1.010805] sched_clock: Marking stable (1010017411, 601217)->(1042562684, -31944056)
[ 1.011055] registered taskstats version 1
[ 1.011326] Loading compiled-in X.509 certificates
[ 1.018004] Loaded X.509 cert 'Build time autogenerated kernel key: 38735a4331bcbe3f4c64e27348fe78da1046b146'
[ 1.024510] zswap: loaded using pool zstd/zsmalloc
[ 1.025184] Key type .fscrypt registered
[ 1.025188] Key type fscrypt-provisioning registered
[ 1.025284] AppArmor: AppArmor sha256 policy hashing enabled
[ 1.029168] PM: Magic number: 12:158:117
[ 1.035507] RAS: Correctable Errors collector initialized.
[ 1.035663] clk: Disabling unused clocks
[ 1.142301] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 1.142309] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.142606] hub 1-1:1.0: USB hub found
[ 1.142669] hub 1-1:1.0: 4 ports detected
[ 1.204181] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.204211] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.205241] ata1.00: ATA-11: SanDisk SD9SN8W-128G-1006, X6103006, max UDMA/100
[ 1.205870] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.209923] ata1.00: Features: Dev-Sleep
[ 1.211935] ata2.00: ATAPI: hp DVDRW GUE1N, UE00, max UDMA/133
[ 1.214604] ata2.00: configured for UDMA/133
[ 1.216282] ata1.00: configured for UDMA/100
[ 1.216450] scsi 0:0:0:0: Direct-Access ATA SanDisk SD9SN8W- 3006 PQ: 0 ANSI: 5
[ 1.216906] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.216911] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.216926] sd 0:0:0:0: [sda] Write Protect is off
[ 1.216930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.216952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.216981] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 1.218548] scsi 1:0:0:0: CD-ROM hp DVDRW GUE1N UE00 PQ: 0 ANSI: 5
[ 1.219633] sda: sda1 sda2 sda4 sda5 sda6 sda7
[ 1.220000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.247068] Freeing unused decrypted memory: 2028K
[ 1.248282] Freeing unused kernel image (initmem) memory: 3464K
[ 1.248292] Write protecting the kernel read-only data: 32768k
[ 1.249095] Freeing unused kernel image (rodata/data gap) memory: 1360K
[ 1.372120] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.372130] rodata_test: all tests were successful
[ 1.372139] Run /init as init process
[ 1.372141] with arguments:
[ 1.372144] /init
[ 1.372146] with environment:
[ 1.372148] HOME=/
[ 1.372150] TERM=linux
[ 1.372151] BOOT_IMAGE=/boot/vmlinuz-6.8-x86_64
[ 1.437324] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.551858] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=b009, bcdDevice= 2.00
[ 1.551870] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.551875] usb 1-1.4: Product: 802.11n WLAN Adapter
[ 1.551879] usb 1-1.4: Manufacturer: Realtek
[ 1.551883] usb 1-1.4: SerialNumber: 00e04c000001
[ 1.662905] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: 8232DE3D-663D-4327-A8F4-E293ADB9BF05 has zero instances
[ 1.662916] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A has zero instances
[ 1.662920] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: 8F1F6435-9F42-42C8-BADC-0E9424F20C9A has zero instances
[ 1.662924] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: DF4E63B6-3BBC-4858-9737-C74F82F821F3 has zero instances
[ 1.678049] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.678475] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.680660] tsc: Refined TSC clocksource calibration: 1497.189 MHz
[ 1.680673] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1594c333f39, max_idle_ns: 440795210089 ns
[ 1.680716] clocksource: Switched to clocksource tsc
[ 1.773065] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.794989] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.795011] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.795215] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 1.801427] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.801443] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.801454] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 1.802311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 1.802343] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.802348] usb usb2: Product: xHCI Host Controller
[ 1.802352] usb usb2: Manufacturer: Linux 6.8.12-3-MANJARO xhci-hcd
[ 1.802355] usb usb2: SerialNumber: 0000:00:10.0
[ 1.803819] hub 2-0:1.0: USB hub found
[ 1.804457] hub 2-0:1.0: 4 ports detected
[ 1.823804] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.823878] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 1.823886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.823890] usb usb3: Product: xHCI Host Controller
[ 1.823894] usb usb3: Manufacturer: Linux 6.8.12-3-MANJARO xhci-hcd
[ 1.823898] usb usb3: SerialNumber: 0000:00:10.0
[ 1.829912] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.830524] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.830712] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.830719] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.832368] hub 3-0:1.0: USB hub found
[ 1.832397] hub 3-0:1.0: 4 ports detected
[ 1.862706] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.887759] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.070624] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 2.237882] usb 2-1: New USB device found, idVendor=0bda, idProduct=58ed, bcdDevice= 0.13
[ 2.237894] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.237898] usb 2-1: Product: HP Webcam
[ 2.237902] usb 2-1: Manufacturer: DGENE019IAQJQU
[ 2.237905] usb 2-1: SerialNumber: 200901010001
[ 2.367289] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 2.527300] usb 2-4: New USB device found, idVendor=0bda, idProduct=0177, bcdDevice=77.11
[ 2.527310] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.527314] usb 2-4: Product: USB2.0-CRW
[ 2.527317] usb 2-4: Manufacturer: Generic
[ 2.527320] usb 2-4: SerialNumber: 20121112761000000
[ 12.157343] usbcore: registered new interface driver usb-storage
[ 12.167212] usbcore: registered new interface driver uas
[ 12.173897] [drm] amdgpu kernel modesetting enabled.
[ 12.175398] ums-realtek 2-4:1.0: USB Mass Storage device detected
[ 12.175957] amdgpu: Virtual CRAT table created for CPU
[ 12.175986] amdgpu: Topology: Add CPU node
[ 12.176419] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x103C:0x8330 0xD4).
[ 12.177159] [drm] register mmio base: 0xF0400000
[ 12.177165] [drm] register mmio size: 262144
[ 12.177286] [drm] add ip block number 0 <vi_common>
[ 12.177291] [drm] add ip block number 1 <gmc_v8_0>
[ 12.177294] [drm] add ip block number 2 <cz_ih>
[ 12.177296] [drm] add ip block number 3 <gfx_v8_0>
[ 12.177320] [drm] add ip block number 4 <sdma_v3_0>
[ 12.177323] [drm] add ip block number 5 <powerplay>
[ 12.177326] [drm] add ip block number 6 <dm>
[ 12.177328] [drm] add ip block number 7 <uvd_v6_0>
[ 12.177330] [drm] add ip block number 8 <vce_v3_0>
[ 12.177332] [drm] add ip block number 9 <acp_ip>
[ 12.178209] scsi host2: usb-storage 2-4:1.0
[ 12.178527] usbcore: registered new interface driver ums-realtek
[ 12.191025] [drm] BIOS signature incorrect 0 0
[ 12.191048] resource: resource sanity check: requesting [mem 0x00000000000c0000-0x00000000000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000cbfff window]
[ 12.191056] caller pci_map_rom+0x69/0x1b0 mapping multiple BARs
[ 12.193553] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from ROM BAR
[ 12.193559] amdgpu: ATOM BIOS: 113-C91400-007
[ 12.193752] [drm] UVD is enabled in physical mode
[ 12.193756] [drm] VCE enabled in VM mode
[ 12.193761] kfd kfd: amdgpu: STONEY not supported in kfd
[ 12.204349] Console: switching to colour dummy device 80x25
[ 12.221674] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[ 12.221686] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 12.221735] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 12.221744] amdgpu 0000:00:01.0: amdgpu: VRAM: 80M 0x000000F400000000 - 0x000000F404FFFFFF (80M used)
[ 12.221751] amdgpu 0000:00:01.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 12.221764] [drm] Detected VRAM RAM=80M, BAR=80M
[ 12.221767] [drm] RAM width 64bits UNKNOWN
[ 12.221962] [drm] amdgpu: 80M of VRAM memory ready
[ 12.221968] [drm] amdgpu: 1901M of GTT memory ready.
[ 12.222004] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 12.222152] [drm] PCIE GART of 1024M enabled (table at 0x000000F400600000).
[ 12.229896] amdgpu: hwmgr_sw_init smu backed is smu8_smu
[ 12.232354] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[ 12.256647] [drm] UVD ENC is disabled
[ 12.258583] [drm] Found VCE firmware Version: 52.0 Binary ID: 3
[ 12.282596] amdgpu: smu version 33.06.00
[ 12.311663] [drm] DM_PPLIB: values for Engine clock
[ 12.311669] [drm] DM_PPLIB: 200000
[ 12.311672] [drm] DM_PPLIB: 300000
[ 12.311673] [drm] DM_PPLIB: 400000
[ 12.311675] [drm] DM_PPLIB: 450000
[ 12.311676] [drm] DM_PPLIB: 496560
[ 12.311677] [drm] DM_PPLIB: 533340
[ 12.311679] [drm] DM_PPLIB: 576000
[ 12.311680] [drm] DM_PPLIB: 600000
[ 12.311682] [drm] DM_PPLIB: Validation clocks:
[ 12.311683] [drm] DM_PPLIB: engine_max_clock: 60000
[ 12.311685] [drm] DM_PPLIB: memory_max_clock: 93300
[ 12.311687] [drm] DM_PPLIB: level : 8
[ 12.311689] [drm] DM_PPLIB: values for Display clock
[ 12.311691] [drm] DM_PPLIB: 300000
[ 12.311692] [drm] DM_PPLIB: 400000
[ 12.311694] [drm] DM_PPLIB: 496560
[ 12.311695] [drm] DM_PPLIB: 626090
[ 12.311696] [drm] DM_PPLIB: 685720
[ 12.311697] [drm] DM_PPLIB: 757900
[ 12.311699] [drm] DM_PPLIB: 800000
[ 12.311700] [drm] DM_PPLIB: 847060
[ 12.311701] [drm] DM_PPLIB: Validation clocks:
[ 12.311703] [drm] DM_PPLIB: engine_max_clock: 60000
[ 12.311704] [drm] DM_PPLIB: memory_max_clock: 93300
[ 12.311705] [drm] DM_PPLIB: level : 8
[ 12.311708] [drm] DM_PPLIB: values for Memory clock
[ 12.311709] [drm] DM_PPLIB: 667000
[ 12.311710] [drm] DM_PPLIB: 933000
[ 12.311712] [drm] DM_PPLIB: Validation clocks:
[ 12.311713] [drm] DM_PPLIB: engine_max_clock: 60000
[ 12.311714] [drm] DM_PPLIB: memory_max_clock: 93300
[ 12.311716] [drm] DM_PPLIB: level : 8
[ 12.311898] [drm] Display Core v3.2.266 initialized on DCE 11.0
[ 12.430486] [drm] UVD initialized successfully.
[ 12.531335] [drm] VCE initialized successfully.
[ 12.531451] amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 3, active_cu_number 2
[ 12.532691] amdgpu: pp_dpm_get_sclk_od was not implemented.
[ 12.532697] amdgpu: pp_dpm_get_mclk_od was not implemented.
[ 12.533687] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:00:01.0 on minor 1
[ 12.546382] fbcon: amdgpudrmfb (fb0) is primary device
[ 13.202997] scsi 2:0:0:0: Direct-Access Generic- SD/MMC/MS PRO 1.00 PQ: 0 ANSI: 4
[ 13.261120] Console: switching to colour frame buffer device 170x48
[ 13.273879] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 14.772908] sd 2:0:0:0: [sdb] 249737216 512-byte logical blocks: (128 GB/119 GiB)
[ 14.773689] sd 2:0:0:0: [sdb] Write Protect is off
[ 14.773701] sd 2:0:0:0: [sdb] Mode Sense: 2f 00 00 00
[ 14.774463] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 16.283592] sdb: sdb1
[ 16.283828] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 17.507508] EXT4-fs (sda2): mounted filesystem bb9328ed-04ab-4ae5-84ff-a6f9df9379e0 ro with ordered data mode. Quota mode: none.
[ 17.701505] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 17.701518] systemd[1]: Detected architecture x86-64.
[ 17.705848] systemd[1]: Hostname set to <Manjaro-mate>.
[ 18.174255] systemd[1]: bpf-lsm: LSM BPF program attached
[ 18.696852] systemd[1]: Queued start job for default target Graphical Interface.
[ 18.726558] systemd[1]: Created slice Slice /system/dirmngr.
[ 18.728400] systemd[1]: Created slice Slice /system/getty.
[ 18.729257] systemd[1]: Created slice Slice /system/gpg-agent.
[ 18.730089] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 18.732248] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 18.733176] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 18.733991] systemd[1]: Created slice Slice /system/keyboxd.
[ 18.734804] systemd[1]: Created slice Slice /system/modprobe.
[ 18.735602] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 18.736211] systemd[1]: Created slice User and Session Slice.
[ 18.736443] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 18.736615] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.737022] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.737162] systemd[1]: Expecting device /dev/disk/by-diskseq/1-part6...
[ 18.737243] systemd[1]: Expecting device /dev/disk/by-uuid/2de82320-ee02-4bd8-abb4-d654a4a27162...
[ 18.737370] systemd[1]: Expecting device /dev/disk/by-uuid/47533aa6-d9cc-47e1-ac0f-70d03ae63524...
[ 18.737454] systemd[1]: Expecting device /dev/disk/by-uuid/49F2-9E1E...
[ 18.737536] systemd[1]: Expecting device /dev/disk/by-uuid/516acbef-602d-47a8-a921-55c0a422d204...
[ 18.737635] systemd[1]: Reached target Local Encrypted Volumes.
[ 18.737726] systemd[1]: Reached target Login Prompts.
[ 18.737815] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 18.737927] systemd[1]: Reached target Remote File Systems.
[ 18.738007] systemd[1]: Reached target Slice Units.
[ 18.738090] systemd[1]: Reached target Mounting snaps.
[ 18.738167] systemd[1]: Reached target Mounted snaps.
[ 18.741059] systemd[1]: Reached target Local Verity Protected Volumes.
[ 18.742178] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 18.743559] systemd[1]: Listening on LVM2 poll daemon socket.
[ 18.747301] systemd[1]: Listening on Process Core Dump Socket.
[ 18.748447] systemd[1]: Listening on Journal Socket (/dev/log).
[ 18.749582] systemd[1]: Listening on Journal Socket.
[ 18.750483] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 18.751073] systemd[1]: Listening on udev Control Socket.
[ 18.752090] systemd[1]: Listening on udev Kernel Socket.
[ 18.755082] systemd[1]: Mounting Huge Pages File System...
[ 18.760982] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.767776] systemd[1]: Mounting Kernel Debug File System...
[ 18.770467] systemd[1]: Mounting Kernel Trace File System...
[ 18.788342] systemd[1]: Starting Load AppArmor profiles...
[ 18.801624] systemd[1]: Starting Create List of Static Device Nodes...
[ 18.815719] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 18.821050] systemd[1]: Starting Load Kernel Module configfs...
[ 18.828082] systemd[1]: Starting Load Kernel Module dm_mod...
[ 18.838586] systemd[1]: Starting Load Kernel Module drm...
[ 18.871163] systemd[1]: Starting Load Kernel Module fuse...
[ 18.885314] systemd[1]: Starting Load Kernel Module loop...
[ 18.894572] systemd[1]: Starting File System Check on Root Device...
[ 18.951025] systemd[1]: Starting Load Kernel Modules...
[ 18.951902] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 18.952084] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 18.959711] device-mapper: uevent: version 1.0.3
[ 18.967401] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 18.970776] loop: module loaded
[ 18.987623] systemd[1]: Starting Coldplug All udev Devices...
[ 18.998823] systemd[1]: Mounted Huge Pages File System.
[ 18.999974] systemd[1]: Mounted POSIX Message Queue File System.
[ 19.007901] systemd[1]: Mounted Kernel Debug File System.
[ 19.009285] systemd[1]: Mounted Kernel Trace File System.
[ 19.019259] systemd[1]: Finished Create List of Static Device Nodes.
[ 19.024951] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 19.025373] systemd[1]: Finished Load Kernel Module configfs.
[ 19.027126] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 19.033393] systemd[1]: Finished Load Kernel Module dm_mod.
[ 19.036657] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 19.037039] systemd[1]: Finished Load Kernel Module drm.
[ 19.042231] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 19.047681] systemd[1]: Finished Load Kernel Module fuse.
[ 19.049253] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 19.049589] systemd[1]: Finished Load Kernel Module loop.
[ 19.087499] systemd[1]: Mounting FUSE Control File System...
[ 19.104228] systemd[1]: Mounting Kernel Configuration File System...
[ 19.105130] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 19.106881] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.107028] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 19.107103] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 19.121185] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 19.125558] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 19.138792] systemd[1]: Finished File System Check on Root Device.
[ 19.147220] systemd[1]: Finished Load Kernel Modules.
[ 19.164423] systemd[1]: Mounted FUSE Control File System.
[ 19.221073] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 19.231211] systemd[1]: Starting Apply Kernel Variables...
[ 19.242054] systemd[1]: Mounted Kernel Configuration File System.
[ 19.276938] audit: type=1400 audit(1718694473.041:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=238 comm="apparmor_parser"
[ 19.286341] EXT4-fs (sda2): re-mounted bb9328ed-04ab-4ae5-84ff-a6f9df9379e0 r/w. Quota mode: none.
[ 19.295296] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 19.301875] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 19.344342] systemd[1]: Starting Load/Save OS Random Seed...
[ 19.350735] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 19.351506] systemd[1]: Finished Apply Kernel Variables.
[ 19.400710] systemd[1]: Finished Load/Save OS Random Seed.
[ 19.428158] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ 19.429443] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 19.451178] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 19.457463] audit: type=1400 audit(1718694473.221:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=239 comm="apparmor_parser"
[ 19.457476] audit: type=1400 audit(1718694473.221:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=239 comm="apparmor_parser"
[ 19.489396] systemd[1]: Finished Coldplug All udev Devices.
[ 19.534628] audit: type=1400 audit(1718694473.301:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=252 comm="apparmor_parser"
[ 19.546546] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 19.547705] systemd[1]: Reached target Preparation for Local File Systems.
[ 19.548648] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
[ 19.548799] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of an unmet condition check (ConditionKernelVersion=<5.6).
[ 19.581015] systemd[1]: Starting Journal Service...
[ 19.591072] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 19.610493] audit: type=1400 audit(1718694473.374:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=257 comm="apparmor_parser"
[ 19.614686] audit: type=1400 audit(1718694473.381:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=257 comm="apparmor_parser"
[ 19.628285] systemd-journald[260]: Collecting audit messages is disabled.
[ 19.789142] systemd[1]: Started Journal Service.
[ 19.837029] audit: type=1400 audit(1718694473.601:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="php-fpm" pid=259 comm="apparmor_parser"
[ 19.939289] audit: type=1400 audit(1718694473.704:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-bgqd" pid=262 comm="apparmor_parser"
[ 19.947670] systemd-journald[260]: Received client request to flush runtime journal.
[ 19.973009] systemd-journald[260]: /var/log/journal/c0524fc81ef44709af1c562aac97441a/system.journal: Journal file uses a different sequence number ID, rotating.
[ 19.973023] systemd-journald[260]: Rotating system journal.
[ 20.079432] audit: type=1400 audit(1718694473.844:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-dcerpcd" pid=276 comm="apparmor_parser"
[ 20.252777] audit: type=1400 audit(1718694474.017:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd" pid=301 comm="apparmor_parser"
[ 21.173421] Adding 8788988k swap on /dev/sda6. Priority:-2 extents:1 across:8788988k SS
[ 21.320712] EXT4-fs (sda4): mounted filesystem 47533aa6-d9cc-47e1-ac0f-70d03ae63524 r/w with ordered data mode. Quota mode: none.
[ 21.401715] EXT4-fs (sda5): mounted filesystem 516acbef-602d-47a8-a921-55c0a422d204 r/w with ordered data mode. Quota mode: none.
[ 21.564071] input: Wireless hotkeys as /devices/virtual/input/input6
[ 22.193776] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 22.193790] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 22.221001] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 22.454054] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 22.454225] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 22.458113] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 22.460265] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 22.488915] acpi_cpufreq: overriding BIOS provided _PSD data
[ 22.630661] cryptd: max_cpu_qlen set to 1000
[ 22.795537] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 22.891267] r8169 0000:02:00.0 eth0: RTL8168h/8111h, b4:b6:86:be:47:b7, XID 541, IRQ 34
[ 22.891281] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 23.513122] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[ 23.547511] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[ 23.547530] psmouse serio1: synaptics: Your touchpad (PNP: SYN3254 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 23.612310] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf00323/0x840300/0x2e800/0x400000, board id: 3320, fw id: 2659795
[ 23.646857] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 23.654008] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 23.912427] AVX2 version of gcm_enc/dec engaged.
[ 23.912495] AES CTR mode by8 optimization enabled
[ 23.946232] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 23.948194] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 23.948618] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 23.952182] mousedev: PS/2 mouse device common for all mice
[ 24.069818] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 24.106714] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 24.111165] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 24.198098] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.198114] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.198120] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 24.198125] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 24.198128] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 24.198131] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 24.198135] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 24.271467] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input11
[ 24.271653] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input12
[ 24.414892] kauditd_printk_skb: 40 callbacks suppressed
[ 24.414900] audit: type=1400 audit(1718694478.181:52): apparmor="STATUS" operation="profile_load" profile="unconfined" name="identd" pid=503 comm="apparmor_parser"
[ 24.442395] audit: type=1400 audit(1718694478.207:53): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot" pid=502 comm="apparmor_parser"
[ 24.674125] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 24.692407] audit: type=1400 audit(1718694478.457:54): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mdnsd" pid=522 comm="apparmor_parser"
[ 24.712065] audit: type=1400 audit(1718694478.477:55): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nmbd" pid=526 comm="apparmor_parser"
[ 24.889315] audit: type=1400 audit(1718694478.654:56): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nscd" pid=551 comm="apparmor_parser"
[ 24.915219] audit: type=1400 audit(1718694478.681:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ntpd" pid=552 comm="apparmor_parser"
[ 24.957610] mc: Linux media interface: v0.10
[ 25.128048] videodev: Linux video capture interface: v2.00
[ 25.147335] rtw_8723de 0000:03:00.0: Firmware version 48.0.0, H2C version 0
[ 25.201704] audit: type=1400 audit(1718694478.967:58): apparmor="STATUS" operation="profile_load" profile="unconfined" name="smbd" pid=565 comm="apparmor_parser"
[ 25.243220] rtw_8723de 0000:03:00.0 wlp3s0: renamed from wlan0
[ 25.297319] audit: type=1400 audit(1718694479.061:59): apparmor="STATUS" operation="profile_load" profile="unconfined" name="smbldap-useradd" pid=566 comm="apparmor_parser"
[ 25.297336] audit: type=1400 audit(1718694479.061:60): apparmor="STATUS" operation="profile_load" profile="unconfined" name="smbldap-useradd///etc/init.d/nscd" pid=566 comm="apparmor_parser"
[ 25.377837] audit: type=1400 audit(1718694479.144:61): apparmor="STATUS" operation="profile_load" profile="unconfined" name="traceroute" pid=567 comm="apparmor_parser"
[ 25.407449] usb 2-1: Found UVC 1.00 device HP Webcam (0bda:58ed)
[ 25.424330] usbcore: registered new interface driver uvcvideo
[ 26.358314] Bluetooth: Core ver 2.22
[ 26.358371] NET: Registered PF_BLUETOOTH protocol family
[ 26.358373] Bluetooth: HCI device and connection manager initialized
[ 26.358382] Bluetooth: HCI socket layer initialized
[ 26.358387] Bluetooth: L2CAP socket layer initialized
[ 26.358395] Bluetooth: SCO socket layer initialized
[ 26.533007] usbcore: registered new interface driver btusb
[ 26.592591] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723
[ 26.593598] Bluetooth: hci0: RTL: rom_version status=0 version=2
[ 26.593611] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin
[ 26.595582] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin
[ 26.597100] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266
[ 26.925737] Bluetooth: hci0: RTL: fw version 0x828a96f1
[ 27.887783] EXT4-fs (sdb1): mounted filesystem 2de82320-ee02-4bd8-abb4-d654a4a27162 r/w with ordered data mode. Quota mode: none.
[ 28.640261] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.640270] Bluetooth: BNEP filters: protocol multicast
[ 28.640279] Bluetooth: BNEP socket layer initialized
[ 28.643705] Bluetooth: MGMT ver 1.22
[ 28.695518] NET: Registered PF_ALG protocol family
[ 29.082175] loop0: detected capacity change from 0 to 8
[ 29.109420] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 29.327507] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 29.369639] NET: Registered PF_QIPCRTR protocol family
[ 29.429186] kauditd_printk_skb: 4 callbacks suppressed
[ 29.429194] audit: type=1400 audit(1718694483.194:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=789 comm="apparmor_parser"
[ 29.441802] audit: type=1400 audit(1718694483.207:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=789 comm="apparmor_parser"
[ 29.518958] r8169 0000:02:00.0 enp2s0: Link is Down
[ 32.064309] wlp3s0: 80 MHz not supported, disabling VHT
[ 32.073439] systemd-journald[260]: /var/log/journal/c0524fc81ef44709af1c562aac97441a/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ 32.208716] wlp3s0: authenticate with 34:81:c4:e1:c5:dc (local address=80:c5:f2:e7:5f:df)
[ 32.319160] wlp3s0: send auth to 34:81:c4:e1:c5:dc (try 1/3)
[ 32.324370] wlp3s0: authenticated
[ 32.327365] wlp3s0: associate with 34:81:c4:e1:c5:dc (try 1/3)
[ 32.336554] wlp3s0: RX AssocResp from 34:81:c4:e1:c5:dc (capab=0x1431 status=0 aid=4)
[ 32.337809] wlp3s0: associated
[ 32.444205] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 34:81:c4:e1:c5:dc
[ 35.363322] Bluetooth: RFCOMM TTY layer initialized
[ 35.363341] Bluetooth: RFCOMM socket layer initialized
[ 35.363352] Bluetooth: RFCOMM ver 1.11
[ 58.327196] systemd-journald[260]: Time jumped backwards, rotating.
[ 66.175558] warning: `conky' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 88.630621] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 89.143978] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 187.611527] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 189.564681] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 190.048044] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 203.138406] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 203.501737] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 207.115112] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 207.248452] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 218.438482] rtw_8723de 0000:03:00.0: timed out to flush queue 1
[ 220.861763] rtw_8723de 0000:03:00.0: timed out to flush queue 1Weil im Live-Modus sowie in der Installation das Netzwerksymbol aussah, als wenn es online ist. Erst als ich ein Update machen wollte, stellte ich fest, dass ich gar nicht online bin. Das Netzwerksymbol änderte auch sein aussehen, als das Update-Center einen Freez hatte.
Ich werde es mit einer Free-BSD-Installation versuchen und melde mich danach.
Code:
[ 25.147335] rtw_8723de 0000:03:00.0: Firmware version 48.0.0, H2C version 0Das könnte / müsste / sollte ein Realtek 8723DE Chipsatz sein. Wobei man bei Realtek immer immer Hinterkopf behalten muss, dass die schon mal aus Sicht des Treibers inkompatible Revisionen unter dem gleichen Namen verkaufen. Laut https://lists.freebsd.org/archives/freebsd-wireless/2024-February/001747.html könnte das funktionieren, ein aktuelles GhostBSD basiert ja auf FreeBSD 14.x. Allerdings brauchst du eventuell
compat.linuxkpi.skb.mem_limit=1 in der /boot/loader.conf.
Macke1979
FreeBSD-User
Zu GhostBSD kann ich jetzt explizit nichts sagen, da dieses jedoch auf FreeBSD basiert (welches ich nutze), gehe ich mal davon aus, dass es da bei der grundlegenden Konfiguration keinen Unterschied gibt. Zunächst wäre es gut, wenn du die Ausgabe von
sysctl net.wlan.devices posten könntest, dann hätten wir schonmal die Bezeichnung deiner Schnittstelle. Eventuell könntest du noch mitteilen, wie die Datei /etc/rc.conf ausschaut.